How can I save the Winedt manual as a pdf file?

[Per Ting]

I have tried using "print" as pdf but all figures are shown as generic
thumbnails. The text is fine, the problem is the figures.

Thanks

[Helmut Haberzettl]

Per,
I've encountered the same problem. It only happens for the basic Manual
part; the Configuration and Macro Manuals work fine. For the basic
Manual, it only happens if one tries to print the selected topic and all
subtopics at once. So, as a workaround, I've found that printing the
topics separately and then stitching them together into one pdf document
preserves all figures. Annoying and tedious, yes, but it works.
--Helmut

Post by Per Ting
I have tried using "print" as pdf but all figures are shown as generic
thumbnails. The text is fine, the problem is the figures.
Thanks

[Helmut Haberzettl]

I forgot to mention that this is a known problem for printing compiled
html files (which is the format of the basic Manual file). Searching
around the web you may find various workarounds which may or may not
work for you. What I suggested below will always work, even though it is
the most tedious procedure.

Post by Helmut Haberzettl
Per,
I've encountered the same problem. It only happens for the basic
Manual part; the Configuration and Macro Manuals work fine. For the
basic Manual, it only happens if one tries to print the selected topic
and all subtopics at once. So, as a workaround, I've found that
printing the topics separately and then stitching them together into
one pdf document preserves all figures. Annoying and tedious, yes, but
it works.
--Helmut

Post by Per Ting
I have tried using "print" as pdf but all figures are shown as
generic thumbnails. The text is fine, the problem is the figures.
Thanks

[Per Ting]

Helmut,

Thanks for the response, but I think this could practically result in ~100
pdf files!

Post by Helmut Haberzettl
I forgot to mention that this is a known problem for printing compiled
html files (which is the format of the basic Manual file). Searching around
the web you may find various workarounds which may or may not work for you.
What I suggested below will always work, even though it is the most tedious
procedure.

Post by Helmut Haberzettl
Per,
I've encountered the same problem. It only happens for the basic Manual
part; the Configuration and Macro Manuals work fine. For the basic Manual,
it only happens if one tries to print the selected topic and all subtopics
at once. So, as a workaround, I've found that printing the topics
separately and then stitching them together into one pdf document preserves
all figures. Annoying and tedious, yes, but it works.
--Helmut

Post by Per Ting
I have tried using "print" as pdf but all figures are shown as generic
thumbnails. The text is fine, the problem is the figures.
Thanks